Arduino LCD Display Screen Module TFT with Touch 3.5 inch

2,000.00

Out of stock

Category:

Description

3.5 inch TFT Touch LCD Screen Display Module For Arduino UNO R3 , Resolution 480 x 320

  • R61509 and ili9327 controller
  • 5V compatible! Use with 3.3V or 5V logic
  • On board 3.3V at 300mA LDO regulator
  • 4 white LED back light. On by default but you can connect the transistor to a digital pin for back light control
  • 4-wire resistive touchscreen.

Sample Test code:
ILI9327:
LCD_Write_COM(0xE9);
LCD_Write_DATA(0x20);
LCD_Write_COM(0x11); //Exit Sleep
delay(100);
LCD_Write_COM(0xD1);
LCD_Write_DATA(0x00);
LCD_Write_DATA(0x71);
LCD_Write_DATA(0x19);
LCD_Write_COM(0xD0);
LCD_Write_DATA(0x07);
LCD_Write_DATA(0x01);
LCD_Write_DATA(0x8);
LCD_Write_COM(0x36);
LCD_Write_DATA(0x48);
LCD_Write_COM(0x3A);
LCD_Write_DATA(0x05);
LCD_Write_COM(0xC1);
LCD_Write_DATA(0x10);
LCD_Write_DATA(0x10);
LCD_Write_DATA(0x02);
LCD_Write_DATA(0x02);
LCD_Write_COM(0xC0); //Set Default Gamma
LCD_Write_DATA(0x00);
LCD_Write_DATA(0x35);
LCD_Write_DATA(0x00);
LCD_Write_DATA(0x00);
LCD_Write_DATA(0x01);
LCD_Write_DATA(0x02);
LCD_Write_COM(0xC5); //Set frame rate
LCD_Write_DATA(0x04);
LCD_Write_COM(0xD2); //power setting
LCD_Write_DATA(0x01);
LCD_Write_COM(0x44);
LCD_Write_COM(0xC8); //Set Gamma
LCD_Write_DATA(0x04);
LCD_Write_DATA(0x67);
LCD_Write_DATA(0x35);
LCD_Write_DATA(0x04);
LCD_Write_DATA(0x08);
LCD_Write_DATA(0x06);
LCD_Write_DATA(0x24);
LCD_Write_DATA(0x1);
LCD_Write_DATA(0x37);
LCD_Write_DATA(0x40);
LCD_Write_DATA(0x03);
LCD_Write_DATA(0x10);
LCD_Write_DATA(0x8);
LCD_Write_DATA(0x80);
LCD_Write_DATA(0x0);
LCD_Write_COM(0x2A);
LCD_Write_DATA(0x00);
LCD_Write_DATA(0x00);
LCD_Write_DATA(0x00);
LCD_Write_DATA(0xeF);
LCD_Write_COM(0x2B);
LCD_Write_DATA(0x00);
LCD_Write_DATA(0x00);
LCD_Write_DATA(0x01);
LCD_Write_DATA(0x3F);
LCD_Write_COM(0x29); //display on
LCD_Write_COM(0x2C); //display on

Reviews

There are no reviews yet.

Be the first to review “Arduino LCD Display Screen Module TFT with Touch 3.5 inch”

Your email address will not be published. Required fields are marked *

X