KEYENCE PLC KV-1000 KV-B16XA KV-B16TA

Description

Specification

Condition

Model

 

   Used

KV-1000

General Specifications

 

Pollution degree 2
Overvoltage category II (when the KV-U7 is being used)
Operating ambient temperature 0 to +50°C (no freezing)*1*2
Operating ambient humidity 35 to 85%RH (no condensation)*1
Operating environment Without dust and corrosive gas
Weight Approx. 290 g, end unit: 30 g, start   unit: 30 g
Insulation resistance 50 M Ω or more (tested with a 500 VDC megger, between the power supply   terminal and the I/O terminals and between all the external terminals and the   case)
Noise immunity 1,500 Vp-p or more, pulse width: 1 µs, 50   ns (by way of a noise simulator), conforms to IEC standards (IEC 61000,   4-2/3/4/6)
Withstand voltage 1,500 VAC for 1 minute between the power   supply terminal and the I/O terminals and between all the external terminals   and the case
Power voltage 24 VDC (±10%)
Internal current consumption (excluding   current for driving input circuits) 320mA or less
Difference related to the CPU hardware,   special functions, etc.

 

I/O

 

External calibration input signal 16 (supports line-driver input)
Control output

 

Number of inputs 8 (high-speed: 4, general-purpose: 4)
With resistors None
5 V power output Available
Connector 40-pin
Access window

 

Device mode The following devices have been added:   data memory: EM, FM; index register: Z; internal auxiliary relay: MR; latch relay: LR.
CPU monitor Deleted: cam switch, added: project name
User messages Access window instruction
Battery (lithium battery) OP-51604
Extended memory None
Program capacity Approx. 160,000 steps
Input time constant switching 8 levels (add 110 µs)
Memory card

 

Hardware SD memory card, multimedia card
Access from ladder program Possible (memory card instruction)
Logging function Set with KV STUDIO

Other When the KV-LE20 is being used, the FTP   server function can be used even during RUN mode.
Unit

 

QL Unavailable
KV-L20
KV-L20R Usable
Interrupt

 

Cause of interruption · 10   interrupts triggered by input relays (R00000 to R00009) · Interrupts triggered by   high-speed counter comparators (CTC0 to CTC3) · Interrupts triggered by positioning comparator 2
Direct input 16 (R00000 to R00015)
Direct output 8 (R00500 to R00507)
High-speed counter/high-speed counter   comparator

 

Response frequency 100 kHz (single-phase), 50 kHz (phase difference),   (line driver)
External calibration input signal A-phase: R00010, R00011,

B-phase: R00012, R00013

Count value Unsigned: 0 to 4,294,967,295, signed:   -2,147,483,648 to +2,147,483,647
Linear counter overflow detection Available

Ring counter The upper and lower limits are settable.
Change direction detection of current   value Possible

Reset function Reset by way of the RES instruction · Reset by way of the CTH   instruction (execution condition turned off) · Automatic reset by way of comparator matching · Reset by way of external preset   input · Reset by   way of the counter enable function
Preset function

 

Preset input

 

R00014/R00015

Preset input polarity settings Available

Allow/inhibit presets
Counter enable function
Comparator matching output Switched by way of the MEMSW instruction,   R00500 (R00504), R00501 (R00505)

Frequency counter Output Ladder programs made with instructions   (FCNT and RCNT instructions)
Input relay R00010/R00012
  Output Ladder programs made with instructions   (PLSOUT instruction)
  Output relay Switched by way of the MEMSW instruction,   R00501 (R00505)
  Duty ratio

Changeable

Note:   All parts of this product are also available on our website

Package includes:

1 X KV-1000

1 X KV-B16XA

1 X KV-B16TA

1 X ANALOG INPUT MODULE: KV-AD40

1X ANALOG OUTPUT MODULE: KV-DA40
Like our page


Electronics Panga