Arduino – Star International

ISD1820 Voice Recording Module + Mic Sound Audio Loudspeaker For Arduino

Mr, Fazal — Sat, 29 Jan 2022 06:00:40 +0000

Type: ISD1820
Size: 38mm * 42.5mm
working voltage: DC 3 ~ 5V
Loudspeaker: 8Ω, 0.5W.

Feature
Power supply: 3-5V, which can be accessed pin power;
Audio recording control mode: the key to control or microcontroller, IO has drawn the line of control;
Buttons control audio recording method of operation:
REC button: record button, you can press and hold the recording, release the button to stop recording;
RLAYE key: trigger mode playback, press will play this whole speech;
PLAYL key: jog mode playback, press and hold until playback, release to stop playback;
RPL Jumper: loop mode control, loop playback;
FT Jumper: direct control, microphone voice through the speaker can playback;

Shipping Included:
1 x ISD1820 Module
1 x Loudspeaker
1 x cable

Other related products are also available, Delivery across all over Pakistan.
Self-pickup in Faisalabad.

Capacitive Soil Moisture Sensor Module For Arduino

Mr, Fazal — Sun, 12 Sep 2021 11:55:07 +0000

Operating Voltage: 3.3 ~ 5.5 VDC
Output Voltage: 0 ~ 3.0VDC
Operating Current: 5mA
Interface: PH2.0-3P
Dimensions: 3.86 x 0.905 inches (L x W)
Weight: 15g

Other related products are also available, Delivery across all over Pakistan.

Yl-67-YS Converter Buck Power Supply Module Regulator for Arduino( 7.5V-20V to 5V )

Mr, Fazal — Sun, 20 Jun 2021 11:35:53 +0000

Condition: Brand New
Plate size: 5.7cm * 2.3cm
Input voltage: input voltage polarity, AC and DC range: 7.5V-20V
Output voltage: 4.5V-5V
Maximum output current: 1.2A

Heartbeat Rate Sensor Module For Arduino Pulse Sensor

Mr, Fazal — Wed, 27 Nov 2019 06:41:56 +0000

The pulse sensor is a sensor used to test the heart rate. Students, artists, athletes, creators, games or mobile terminal developers can develop interactive works related to heart rate. The sensor can be worn on a finger or earlobe and connected to the Ard via a wire. It also has an open source app that displays your heart rate in real time. The essence is an optical heart rate sensor that integrates an amplifying circuit and a noise canceling circuit.

Note: Other sensor modules are also available, Delivery in all over the Pakistan.

Arduino Sensor Shield V5.0 Sensor Expansion Board

Mr, Fazal — Sat, 26 Oct 2019 08:26:48 +0000

– Color: Blue panel
– Retain the merits of the V4.0 version
– Laminated design
– PCB immersion gold processing technology
– IIC interface
– Bluetooth module communication interface
– SD card module communication interface
– APC220 wireless rf modules communication interface
– RB URF v1.1 ultrasonic sensors interface
– 12864 LCD string of line and parallel interface
– 32 servo controller interface

Other related products are also available, Delivery across all over Pakistan.

self-pickup in Faisalabad.

NANO I/O IO Expansion Sensor Shield Module For Arduino UNO R3 Nano V3.0 3.0 Controller Compatible Board I2C PWM Interface 3.3V

Mr, Fazal — Tue, 15 Oct 2019 06:56:11 +0000

For Arduino Nano IO Expansion Shield is specifically designed to facilitate an easy connection between FOR Arduino Nano and many other devices. In essence, it expands the Nano controller to link those devices in a simple and trouble free manner. It is a perfect companion of Nano breadboard and compatible with both Nano v2.x and v3.x.

14 I/O Pin (servo type with GND, power and signal)

8 analog Pin with power output and GND

6 PWM Pin

1 Servo power input

5 I2C expansion Pin

AREF output

3.3V output

LilyPad Buzzer Small Sound Module For Arduino

Aaqil Mahmood — Mon, 15 Apr 2019 06:18:35 +0000

it’s a little buzzer system of water lily. Use 2 I / O pins on the LilyPad main board and create different sounds based on the different frequency of I / O switch. strong enough to hear inside a pocket but not obtrusively loud.
Please note: This is an inductive buzzer meaning that is will act as a short circuit if you are not actively driving it. we recommend that you set both I / O pins to low (0V) when the buzzer is not used. Also, it came to our attention that washing these buzzers will damage. until we have found a solution to this, avoid washing any part of your project that contains any of these buzzers. LilyPad is a portable e-textile technology developed by Leah Buechley and Cooperatively designed by Leah and SparkFun. each LilyPad has been creatively designed to have large connection terminals to allow them to be sewn into clothing. Various input, output, power, and sensors are available. they’re even washable!
Dimensions:
20mm
Thin outside diameter 0.8mm PCB
Package Contains:

1 x New LilyPad Buzzer Module for Arduino S
Like our page

Electronics Panga

XBee 1mW Wire Antenna – Series 1 (802.15.4)

Aaqil Mahmood — Mon, 18 Sep 2017 13:08:53 +0000

These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

Features:

3.3V @ 50mA
250kbps Max data rate
1mW output (+0dBm)
300ft (100m) range
Wire antenna
Fully FCC certified
6 10-bit ADC input pins
8 digital IO pins
128-bit encryption
Local or over-air configuration
AT or API command set

Other types of Arduino modules are also available on our website with delivery to any city in Pakistan.

360 Degree Rotary Encoder Brick Sensor Module for Arduino

Aaqil Mahmood — Tue, 12 Sep 2017 13:42:57 +0000

Technical parameters:

Power: 5V
Pulse Circle: 20
Material: PCB, Aluminium
Net Weight: 8G
Condition: New

Other types of sensors and modules are also available on our website with delivery to any city in Pakistan.

LilyPad Arduino USB ATmega32U4 Board Module

Aaqil Mahmood — Thu, 07 Sep 2017 13:28:57 +0000

This is LilyPad Arduino – the main board consisting of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. Board will run from 2V to 5V. The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat! We now use a surface mount programming connector to keep the header from poking through.

This version of the LilyPad now uses the new ATmega328 at 8MHz. Arduino 0016 supports the Arduino Pro Mini 328/8MHz. Use this setting when using this new LilyPad 328.

Flash Memory32 KB (ATmega32u4) of which 4 KB used by bootloader

SRAM2.5 KB (ATmega32u4)EEPROM1 KB (ATmega32u4)Clock Speed8 MHz

50mm outer diameter
Thin 0.8mm PCB

Other Arduino products are also available on our website with delivery to any city in Pakistan.

XBee USB Adapter for Arduino

Aaqil Mahmood — Sat, 19 Aug 2017 13:27:16 +0000

Details:

The XBee USB adapter is used for the XBee module configuration parameters to facilitate or to use as a wireless data transmission.
It can be easily connected to a PC via mini USB cable. Further, it has XBee-setting support software X-CTU. It can also be used as a USB-TTL adapter.
Used for the XBee module configuration parameters
Easily connected to a PC via mini USB cable
XBee-setting support software X-CTU
Also used as a USB-TTL adapter

Other types of Arduino modules are also available for delivery to any city in Pakistan.

MT8870 DTMF Voice Speech Audio Decoder Module

Aaqil Mahmood — Wed, 09 Aug 2017 12:23:41 +0000

Onboard complex frequency decoder chip MT8870

Voice input interface board

Onboard five LED indicators for easy viewing output state

The chip has been drawn mainly basic pin

PCB size: 26.5 (mm) x24.5 (mm)

Other types of modules are also available on our website with delivery to any city in Pakistan.