Wireless – Star International

NRF24L01 2.4GHz Wireless Transceiver Module

Mr, Fazal — Mon, 03 Jul 2023 08:33:23 +0000

MODEL:NRF24L01
Made in: China
Weight:2g
Height:11mm
Width:15mm
Length:28.5mm
This module uses the nRF24L01 integrated circuit, which is a low cost highly integrated RF transceiver, which operates in the standard ISM band and is capable of data rates up to 2 Mbps. This module has 5V tolerant inputs, making it easy to interface the module with the most popular microcontroller boards, like Arduino

HC12 Long Range 1Km Wireless RF Transceiver Module 433Mhz SI4463

Mr, Fazal — Sat, 24 Jun 2023 10:58:17 +0000

The HC-12 is a 100mW multi-channel wireless transceiver you can use in your projects to transmit and receive serial information.

The HC-12 is a half-duplex wireless serial communication module with 100 channels in the 433.4-473.0 MHz range that is capable of transmitting up to 1 km. This project will begin by using the HC-12 to create a wireless link between two computers and end with a second article that creates a simple wireless GPS tracker.

XH-A105 Bluetooth5.0 TDA7498 Wireless Digital Power Amplifier Stereo Board

Mr, Fazal — Thu, 22 Jun 2023 08:37:14 +0000

Product Model: XH-A105
Input voltage: 12-24 V/DC
Current: more than 3A
Output power: 2 x 100W
Audio input: Bluetooth, TF card, AUX
Number of channels: two channels.
Size: 92 x 85 x 20mm
Mounting hole: 3 mm.
Installation hole spacing: 85 x 5 x 78.5 mm.

Bluetooth Operation Guide:
When the power amplifier plate is connected to the power supply and the Bluetooth is not connected, the Bluetooth indicator flashes quickly. When the Bluetooth connection is successful, the Bluetooth indicator will stop flashing. When the song is played, the Bluetooth indicator flashes slowly.

Wireless Bluetooth Host Serial Transceiver Module JY-MCU Base Board For HC-06 HC-07 HC-05 BC-04

Mr, Fazal — Sun, 19 Sep 2021 11:32:12 +0000

This Bluetooth module can be used to establish a wireless serial connection between MCU, such as Arduino, and other devices. To pair the device to associate, used the configuration Master/Slave.

Technical specifications:
Operating voltage: 3.3 ~ 6 V
Status LEDs (150 mA – 3.3V)
Search button
Compatible with Bluetooth devices via the Master/Slave configuration

Connection mode:
1.STATE
2.RXD
3.TXD
4.GND
5.VCC
6.EN
Strip Connection: 2.54mm
Dimensions: 1.55 x 3.98 cm

4.0 Audio Receiver Board Wireless Stereo Sound Module 12V 24V Car

Aaqil Mahmood — Sat, 23 Feb 2019 05:43:25 +0000

Bluetooth Audio Receiver Board
Specification:

Model: M-Diy-BL1200

Sound balance:£¼2db
Transmit power: Class2
Handsfree protocol:1.6
Supply voltage: DC 6~30V
Transmission distance:10~20M
Frequency response: 80Hz~22KHz
Size(L*W*H):55 x 50 x 10 mm
Bluetooth Specification: Bluetooth V3.0+EDR, Support Bluetooth 4.0
1.Can not be directly connected to speakers.
2. Bluetooth audio receiver board not all computers can be paired with it.

Package included:
1 x Audio Receiver Board
3 x Connect cable
Like our page

Electronics Panga

XBee 1mW Wire Antenna – Series 1 (802.15.4)

Aaqil Mahmood — Mon, 18 Sep 2017 13:08:53 +0000

These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

Features:

3.3V @ 50mA
250kbps Max data rate
1mW output (+0dBm)
300ft (100m) range
Wire antenna
Fully FCC certified
6 10-bit ADC input pins
8 digital IO pins
128-bit encryption
Local or over-air configuration
AT or API command set

Other types of Arduino modules are also available on our website with delivery to any city in Pakistan.

5V IR Infrared Remote Decoder Encoding Transmitter & Receiver Wireless Module

Aaqil Mahmood — Tue, 18 Jul 2017 14:12:54 +0000

Parameters:
1. Specification: 27”17MM
2. Supply voltage: 5V
3. Communication: Serial communication (TTL level)
4. firing distance: 6-10 meters (OUR actual environmental testing eight meters Stability Control) Function:
1. With the infrared emission features.
2. With infrared encoding.
3. With the infrared emission head expansion interface.
4. With serial communication functions, communication level is TTL.
5. Can control 99% of the infrared format devices,

including televisions, fans and other electrical and electronic equipment.
6. Support for encoding chips :( typical encoding chips such as uPD6121, uPD6122, TC9012 and numerous

compatible chip model, such as the PT2221, PT2222, SC6121, SC6122, SC9012, etc.)
7. Can be used as an infrared wireless data communication, data transmission, control and other functions IR

Other types of sensors are also available on our web for student projects with delivery to any city in Pakistan.

ESP8266 serial WiFi wireless module wireless transceiver

Mr, Fazal — Wed, 14 Oct 2015 13:20:00 +0000

1 AT command Sported,

2 Comport TTL interface.

3 Two powerful internal ran LWIP agreement

4 supports three modes: AP, STA, AP + STA coexistence mode

5 perfect simple and efficient AT commands, allowing you to develop more simple.

Wireless Serial 6 Pin Bluetooth RF Transceiver Module HC-05 RS232 Master Slave

Mr, Fazal — Sun, 16 Aug 2015 11:47:35 +0000

Note:It’s HC-05 Bluetooth module Slaveand master two in one module
this module can be set to a transmitter or receiver, transmitter could pairing with receiver , receiver and receiver or transmitter and transmitter can’t communication between, receiver could pairing with computers and cell phone bluetooth , when buying, the default for receiver.

1. It is HC-05.
2. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards.
3. Module working voltage 3.3 V.
4. Potter default rate of 9600, the user can be set up.
5. The core module size : 28 mm x 15 mm x 2.35 mm.
6. Working current: matching for 30 MA, matching the communication for 8 MA.
7. Dormancy current: no dormancy.
8. Used for GPS navigation system, water and electricity gas meter reading system.
9. With computer and bluetooth bluetooth adapter, PDA, seamless connection equipment

Commercial Series: Bluetooth module board Series
With LED indicator light, use 150mA and 3.3V regulation chip.
With VCC.GND.TXD.RXD foot for the Bluetooth
With “Re-seach” button(ON/OFF/WAKE foot for it , external MCU outinput “High level” can control module to re-seach)
Compatible with bluetooth master module”.slave module”or master-slave(whole) module.
Input voltage: 3.3~6V
Size: 1.55cm*3.98cm

Other similar products are also available on our website with delivery to any city of Pakistan. Visit our website for updated price and pictures.

NRF24L01+PA+LNA SMA Antenna Wireless Transceiver 2.4G

Mr, Fazal — Sun, 16 Aug 2015 11:43:25 +0000

This wireless Transceiver module is an easy and suitable module if you want to setup your wireless communication system with low cost!! It can achieve a good balance between wireless transition performance and cost! You can easily add it with your own MCU/ARM/PIC/AVR/STM32 system! What’s more, this nRF24L01+ module is designed with Power amplifier and SMA antenna This allowed you to use the wireless communication up to 1000 meters! (No barrier)

Specifications:
Frequence: 2.4GHz~2.5GHz
Operating voltage: 3 ~ 3.6V Max
Current: 115mA
Multi-frequency: 125 frequency
Support up to six channels of data reception

433MHZ RF wireless receiver & transmitter module

Mr, Fazal — Fri, 19 Jun 2015 13:18:39 +0000

433 Mhz radio frequency wireless receiver and transmitter modules pair.

433 Mhz carrier frequency for wireless interfacing between two devices.

Uses: remote controlled cars etc.

HC-06 Wireless Bluetooth Transceiver Module

Mr, Fazal — Fri, 19 Jun 2015 12:48:49 +0000

HC-06 wireless bluetooth transceiver module with an EDR module, and the change range of modulation depth is 2Mbps-3Mbps. Sensitivity of this bluetooth transceiver module can reach to -80dBm. This module can be used in the SMD.

Description:

Base on CSR bluetooth chip and bluetooth V2.0 protocol standard
Operating Voltage: 3.3V
Operating Current: 20~30mA (during pairing), 8mA (pairing finished)
Baud Rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, user resettable
With built-in 2.4GHz antenna and external 8Mbit flash
USB Protocol: Full speed USB1.1, compliant with USB2.0
Working Temperature: -25 ~ +75℃
Storage Temperature: -40 ~ +85℃
Size (L x W): Approx. 27 x 13 mm
Application Fields: GPS navigation / meter reading system for energy / collecting-controlling system of industrial sites
Allow seamless link with bluetooth notebook, computer+bluetooth adapter, PDA and more