PWM to Voltage Converter Module 0%-100% to 0-10V for PLC Mach3 MCU Digital to Analog Signal PWM Adjustabl Converter Power Module

Description

Module working voltage: DC 5V-12V
Output PWM frequency: about 50KHZ
PWM amplitude: 5V
Conversion range: 0-5V/0-10V
Voltage conversion: 0%-100%6PWM
Tolerance: 1%-3%

Pin description:
Voltage to PWM:
VCC: Working power supply 5V-12V
GND: working power ground
VIN: input voltage 0-10V
GND: Input signal negative terminal
GND: Output PWM ground
PWM: output PWM

Instructions for use:
Connect the working voltage to VCC and GND. Do not connect them in reverse to avoid damage to the board and devices. Connect a controllable voltage at the terminal. The voltage range is divided into two types: 0-5V and 0-1 0V according to the select mode. The PWM output is PWM. The duty cycle can be adjusted by adjusting the voltage. The accuracy can be controlled by adjusting the potentiometer