- – voltage range: 2.4-5 V
- – maximum output current: 500MA
- – board size: 32 x 20 mm
Click touch (touch duration time is less than 550ms) can control the lamp.Click once, the lamp lights; click again, the lamp off.The initial brightness of lights lit the fixed for the whole brightness of 90%.
Press the touch for a long time (touch duration time is more than 550ms), you can achieve stepless dimming the lights. Press long time once, light levels gradually increase light levels when released after the release time parked in the corresponding brightness, long time if more than three seconds, the light levels to achieve maximum brightness does not change; again long press touch, light levels gradually decreased to stop when you release the light levels in the corresponding brightness release time, if a long time more than three seconds, the light levels after reaching the minimum brightness does not change.
TI touch input corresponds to the LED lighting control output. There are four optional functions, decided by the T1 and T2 pins input state before power. The details are as follows:
T1=1，T2=1: Without brightness memory, suddenly light and off LED touch Stepless dimming function.
T1=0，T2=1: Without brightness memory, gradually light and off LED touch Stepless dimming function.
T1=1，T2=0: With brightness memory, gradually light and off LED touch Stepless dimming function.
T1=0，T2=0: LED three sections to touch dimmer function.
Other similar products are also available on our website with delivery to any city of Pakistan.