AC/DC Single Output Switching Power Supply 12V 1.3A 15W Mean Well RS-15-12

400.00

Out of stock

Categories: , Tag:

Description

FEATURES:
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
No load power consumption less than 0.5W
All using 105°C long life electrolytic capacitors
Withstand 300VAC surge input for 5 second
High operating temperature up to 70°C Withstand 5G vibration test
High efficiency, long life and high reliability

Item condition: Used

OUTPUT:
DC VOLTAGE:12V
RATED CURRENT:1.3A
CURRENT RANGE:0 ~ 1.3A
RATED POWER:15.6W
RIPPLE & NOISE (max.):120mVp-p
VOLTAGE ADJ. RANGE:10.8 ~ 13.2V
VOLTAGE TOLERANCE:±1.0%
LINE REGULATION:±0.5%
LOAD REGULATION:±0.5%
SETUP, RISE TIME:1000ms, 30ms/230VAC; 1000ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.):70ms/230VAC 12ms/115VAC at full load

INPUT:
VOLTAGE RANGE:85 ~ 264VAC; 120 ~ 370VDC
FREQUENCY RANGE:47 ~ 63Hz
EFFICIENCY (Typ.):81%
AC CURRENT (Typ.):0.35A/115VAC; 0.25A/230VAC
INRUSH CURRENT(Typ.): COLD START 65A/230VAC
LEAKAGE CURRENT: Less than 2mA / 240VAC
OVERLOAD: Above 105% rated output power; Protection type: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE:13.8 ~ 16.2V; Protection type: Shut off o/p voltage, clamping by zener diode
OVER TEMPERATURE: U1 Tj 140°C typically (U1) detect on main control IC; Protection type: Shut down o/p voltage, recovers automatically after temperature goes down

WORKING TEMP:-20 ~ +70°C (Refer to derating curve)
WORKING HUMIDITY:20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY:-40 ~ +85°C , 10 ~ 95% RH
TEMP. COEFFICIENT:±0.03%/°C (0~50°C)

Reviews

There are no reviews yet.

Be the first to review “AC/DC Single Output Switching Power Supply 12V 1.3A 15W Mean Well RS-15-12”

Your email address will not be published. Required fields are marked *

X