HW-585 DC 12V PWM CPU Fan Temperature Control Speed Controller CPU High-Temp Alarm


Out of stock



Operating voltage: DC12V
circuit load capacity: maximum current output per 5A, current up to bus 9A
output range: first channel 20% -100%, or 40% -100% (TFL = ON)
second channel and second Three channels 10% -100%
(Note: The above range only the PWM range, the fan varies depending on the actual control effect.)
Temperature probe parameters: 50k B = 3950
thermostat temperature zone error: probe depending on error temperature, Generally 3-5%
stall alarm minimum speed: 700-800 rpm

function setting switch Description:

TFL (No. 1): minimum temperature channel PWM setting, when the state FAN1 PWM minimum 40%, OFF minimum PWM FAN1 is 20%.
TP1 TP2 (No.2, 3): Temperature channel control temperature zone should be interpreted as follows in use temperature probe):

TP1 TP2 acceleration temperature full speed temperature
off 35 ° C 45 ° C
off 40 ° C 55 ° C
Off 50 ° C 70 ° C
60 ° C

A temperature lower than 90 ° C Accelerated temperature, minimum rotation speed at the output; more than all temperature, always full speed at the output.

BF1 BF2 (No. 4, 5): Supported FAN1 FAN2 Stall alarm function switch, open channel fan disassembled when supported, controller soundand and light (operate with the puzzle), automatically excluded fan rotation recovered. BF1 and BF2 both open (ON), FAN1, FAN2 or one or both stop, the controller is alarm!

Like our page

Electronics Panga


There are no reviews yet.

Be the first to review “HW-585 DC 12V PWM CPU Fan Temperature Control Speed Controller CPU High-Temp Alarm”

Your email address will not be published. Required fields are marked *